Ladder Extension Aluminium

Three section push-up aluminium ladder with top fitting for poles, a clam cleat and lashing rope and a vertical line indicator.

Ladder 5B - Closed length 8'4", extended length 20'3", width 17"
Ladder 4B - Closed length 7'2", extended length 17'2", width 17"

Ladder 5B (21kg)
Ladder 4B (17kg)

0285
0283
Ladder Chain

For securing ladders when stored unattended. 5/16 Long links made of galvanised steel. Not intended for use in lifting.

Chain Ladder 6ft
Chain Ladder 3ft

0289
0290
Step Ladder

Heavy Construction for industrial use with treads at 250mm rise pinned with ring shank nails. Made of wood. Manufactured to BS 1129 Class 1 and Kitemarked.

Also available made of Fiberglass and Aluminium.

Treads
4
5
6
7
8
9
10
11
12

Height
0.97m
1.22m
1.47m
1.72m
1.97m
2.25m
2.47m
2.72m
2.97m

Weight
8kgs
9kgs
10kgs
11kgs
12kgs
16kgs
20kgs
24kgs
28kgs

Code
Z-5492
Z-2351
Z-1236
Z-5493
Z-0128
Z-5495
Z-0129
Z-5496
Z-5497
Padlocks

Four lever padlock.

Padlock 1 - 1 1/4" Body width, hasp diameter 1/4", throat depth 1/2"

Padlock 2 - 2" Body width, hasp diameter 1/3", throat depth 3/4"

Padlock 1
Padlock 2

(small) with key
(large) with key

0599
0598
Part No. 0617
Belt Safety 8

Designed for personnel working on poles and manufactured to BS 1397 Type A. Consists of a body belt worn around the waist and a longer belt which is passed around the pole. The pole belt has an anti-friction pad and is fastened to the body belt with a snap hook and "D" ring. Both the body belt and pole belt are fully adjustable with self locking buckles and latches to suit all users.
Part No. Z-5634
Safety Harness

Incorporates a full chest strap that is fully adjustable and offers the user both front and back attachments points. Ideal for overhead work where front attachment may be a requirement.
Part No. 0614
Belt Pocket

A top opening tool bag with two attachment straps.

25cm x 25cm
 
Part No. 0018
Dispenser 1A

For the dispensing of Wire Jumper and Cable Internal up to 12 wire, and PVC power cable. Can carry up to two reels simultaneously provided the total width does not exceed 225mm. Manufactured out of tubular steel the dispenser includes an integral handle.
 
Part No. 0489
Stripper Dropwire 10

Hand held tool for stripping the dropwire outer sheath prior to termination. Makes a longitudinal cut in the cable sheath which then allows the cut sheath to be removed using a pair of wire cutters.
 
Part No. 0243
Splitter Cable Sheath 13

Used in preparing Cable Dropwire 10 and Cable Down Lead 1 for end termination.
 
Part No. 0280
Reel Extension

For use with 110v mechanical aids and tools. Comprises a cable reel and stand with carrying handle. The reel is fitted with cable 1.5mm sq with a tough rubber sheath and rubber insulation. 13 Amp plu and socket are already fitted.

240 volt with 13 Amp plug 25m

15m cable, 1.5mm sq
 
Part No. 0335
Grip Pulling Aerial Cable 2A

Scissors action tool to grip and pull aerial cable during erection.
 
Part No. 1122
Grip Stay Pole

Used to terminate Wire Steel 7/2.00 at pole heads end when used as stay wire, also for terminating lashed aerial cable where this wire is used.
 
Part No. 1123
Grip Stay Anchor

Used to terminate Wire Steel 7/2.00 to either Anchor Screw Stay, or Insulator Stay 2, when these are inserted in a stay. Also used for terminating lashed aerial cable, when using the same wire, on the span side of Insulator Stay 2 at power crossing.
 
Anchor Screw Stay 1

Used as a ground anchorage when staying poles, has to be installed by a pole erection unit. Anchor Stay Manual 1.
Used as a ground anchorage when staying poles, to be installed by a slide hammer.

Grip Stay Anchor 1
Anchor Screw Stay 1

1131
1130
 
Part No. 0353
Hook Aerial Cable 1

Used to support aerial cable at through positions. Manufactured from "D" section steel bar and coated in nylon with a molybdenum additive to reduce friction when pulling in the cable.
 
Part No. 1087
Eyebolt Expanding 1A

For providing a fixing point for Clamp dropwire in masonry, requires an 8mm pre-drilled hole.
 
Part No. 1023
Bracket 22

Used as a fixing point for Clamps Dropwire on buildings and poles.
 
Part No. 1024
Bracket 32

Used as a fixing point for Clamps Dropwire on buildings where Bracket 22 does not give enough clearance from gutterings and eaves.
 
Part No. 1121
Ring Pole Head Dropwire

Used to support Clamp Dropwire on poles. Enables clamps to be fitted to any side of the pole.
 
Part No. 1034
Step Pole 1

For use on wooden poles.
     
Part No. 1101
Clamp Dropwire 10A

For use with cable Dropwiring, with the exception of Dropwire 8.
     
Part No. 1160
Connector Dropwiring

Connector Dropwire 2A used to connect Dropwire of 0.5mm-0.9mm diameter. This would include Dropwire 5,6,7,9A,9B,10 and 11. This is a grease filled insulation Displacement Connector.